T 1004
Производитель:
ZMM Stomana
Technical specification of T 1004
| Technical data | Dim. | Value |
|---|---|---|
| Work table size | mm | 1000x500 |
| Work table height from floor | mm | 850 |
| Work table openings diameters | mm | 65 ; 105 ; 160 ; 190 |
| Distance btw front part of work table and spindle center | mm | 285 |
| Spindle diameter | mm | 30 |
| Spindle work height | mm | 160 |
| Spindle vertical stroke | mm | 125 |
| Tool max diameter for profiling | mm | 180 |
| Tool max diameter/depth of travel under work table surface | mm | 180/75 |
| Spindle speed | min-1 | 1400/3500/6000/8000 |
| Support safety guides | mm | 2x350 |
| Dust port diameter over/under work table | mm | 120/120 |
| Motor | ||
| Spindle moulder motor power - 3 phase | KW | 2.2 (3.0 - optional) |
| Size | ||
| LxWxH without protector and clamping device | mm | 1000x500x850 |
| Weight | ||
| Net weight | kg | 195 |
Standard equipment
Fixed cast-iron working table with grinded surface. Non-tilting spindle. Support (protector) for the tool for profiling with maximal diameter ø180 mm. Vertical and horizontal clamping device. Support safety guides with total length 700 mm and height 155 mm. Diameter of the opening in the working table ø190 mm. 4 speeds of rotation. Dust collection ports with diameter Ø 120 mm - under and over the working table. Electronic brake. Built-in device for spindle blocking during tool replacement. Electric blocking the machine run during tool replacement by an electric end switch. Electric blocking the machine run when changing revolutions by an electric end switch.
Optional equipment
3.0 kW motor; Support safety guides 500mm; Integral safety guides 500mm; Extension tables for the left and right sides; Spindle diameters 1 1/4", 32mm, 35mm, 40mm ; Carriage and miter fence with extension; Feeder